Forkliftning shinalar bosimi beqaror bo'lganda, bu uni keltirib chiqaradigan ko'plab omillar mavjudligini ko'rsatadi va bu forkliftning o'ziga ham katta zarar keltiradi. Forkliftning shinalar bosimi barqarorligini qanday samarali hal qilish mumkin? Avvalo, siz beqaror bosimning sababini bilishingiz kerak. Buning sabablari nima?
① Excessive air pressure will cause severe wear on the center of the forklift tires, which will also affect the service life of the tires. The contact surface with the ground will decrease and the adhesion will decrease, which will affect the braking effect. Rigidity increases, and the vibration of the vehicle body becomes greater, causing the steering wheel to vibrate and deviate, and it will also reduce the driving comfort. At the same time, vibration will also indirectly affect the life of other parts, and it will increase the tension of the tire cord, which is easy to break. When driving on uneven roads or encountering obstacles, it will be affected by the impact and prone to puncture.
② If the air pressure is too low, the contact surface between the forklift tire and the ground will increase, and both sides will be severely worn. During high-speed and long-distance driving, the tire temperature rises and the strength of the carcass decreases, causing the sidewall cords to break and the carcass Delamination and tumor formation can easily cause puncture accidents.
Shuning uchun forklift shinalarining normal haydashini samarali ta'minlash uchun yuqori sifatli shinalarni sotib olish yoki almashtirishdan tashqari, haydashdan oldin havo bosimi va protektor holati ham tekshirilishi kerak. 10,{2}}km haydashda forklift shinalari old va orqa va ko'ndalang yo'nalishda sozlanishi kerak. , Bu shinalarni yaxshiroq himoya qilishi mumkin.